Your Ad Here

Maintenance of stainless steel cutting blades

Guaranteed Best Prices on Domains and Hosting!!!

In order to extend the service life of stainless steel special cutting blades, it is necessary to carry out corresponding maintenance. From the relevant experts, we know that the abrasive grinding tools wholesale manufacturers now have the following common maintenance measures for stainless steel special cutting blades. : When the thin flat cutting disc is no longer sharp. When the cutting surface is rough, it must be repaired in time. The grinding cannot change the original angle and destroy the dynamic balance.
If the cutting piece is not used immediately, it should be laid flat or suspended by the inner hole. The other pieces or feet should not be stacked on the flat saw blade, and the moisture should be protected against corrosion. The inner diameter of the cutting piece is corrected. Hole processing, etc., must be carried out by the factory. If the processing is poor, it will affect the product use effect and may be dangerous. In principle, the hole expansion should not exceed the original hole diameter of 20mm, so as not to affect the stress balance.
Many times we need to deal with it, that is, grinding and cutting, so it is very necessary to use some equipment. The use of cutting blades is to process some mechanical products. It is a type we often use. A tool, so pays attention to some tips for its use:
The hardest part of the cutting piece is the diamond material, which is mainly composed of the base body and the cutter head. The base body is the main support part of the bonding cutter head, and the cutter head is the part that plays the cutting role during use. Need to pay attention to the process: when replacing the cutting piece, first turn off the power supply, hang the warning sign, the cutting piece must be concentric, fasten, so as not to fall off and hurt people; if the cutting piece is damaged during operation, it must be stopped immediately, and the replacement is good. After the cutting is completed, turn off the power first. When the grinding wheel stops rotating, take the object again to avoid the standard cut off wheel for metal hurting people.

Tagged as: ,

Leave a Response

You must be logged in to post a comment. Your Ad Here