Your Ad Here

How to use the grinding wheel cutting machine

For the high quality metal grinding disc, it is often used in our daily life. It is made of glass fiber and resin as a reinforced bonding material with high tensile strength, impact resistance and bending strength. It is widely used in ordinary steel, stainless steel metal and non-metal. The production of raw materials, excellent materials and exquisite craftsmanship ensure high cutting efficiency and best economical effect on different material workpieces. So, what is the fast cheap metal grinding disc cutting machine? What are its use methods and precautions? China grinding disc manufacturer comes to talk to everyone.

The high quality metal grinding disc cutting machine, also known as grinding wheel saw, grinding wheel cutting machine is suitable for construction, hardware, petrochemical, mechanical metallurgy and hydropower installation. The use method and precautions of the grinding wheel cutting machine are as follows:

1. The grinding wheel cutting machine should be placed on a stable ground, away from flammable materials, and the power line should be connected to the leakage protection device.

Guaranteed Best Prices on Domains and Hosting!!!

2. The fast cheap metal grinding disc should be installed as required, and the test starting operation should be stable before starting work.

3. The clamping device should be safe and reliable to prevent accidents from loosening the workpiece.

4. When cutting, the operator should evenly cut and avoid the front side of the cutting piece to prevent accidents caused by improper operation of the cutting piece.

5. After the work is finished, wipe the surface of the grinding wheel cutting machine and clean the workplace. The open storage should be protected from rain.

Finally, China grinding disc manufacturer reminds everyone to use the precautions of the high quality metal grinding disc cutting machine, the operating box or switch must be intact, and must have grounding protection; when the operating handle is used for cutting movement, the force should be even and stable, do not use too much force In order to avoid overloading, the grinding wheel cutting piece is cracked; the clamping device of the fast cheap metal grinding disc cutting machine should be operated flexibly and reliably clamped, and the hand wheel, screw, nut, etc. should be intact. Moreover, after the operation is finished, the power should be cut off immediately and arranged. it is good.

Tagged as: , ,

Leave a Response

You must be logged in to post a comment. Your Ad Here