Your Ad Here

Did tractor mount Multi-function Reaper Binder manufacturer installation and commissioning?

Tractor installation multi-purpose harvester adhesive system Although it is common agricultural equipment for many users nowadays, some users of this equipment are still not very familiar with the installation and commissioning of this equipment. Today, Tractor Mounted Multi-function Reaper Binder manufacturer Aike let’s tell everyone about it.

Installation and commissioning

Insert the lower hanging wall pin of the implement into the hanging armhole of the walking machine, pin the pin lock, and the upper arm of the machine is linked with the central rod of the tractor. The center rod can be rotated to adjust the depth of the machine, and the gearbox can be fixed to the tractor. On the output shaft, the implement gearbox and the split gearbox are connected by a crank arm.

Guaranteed Best Prices on Domains and Hosting!!!

Technical maintenance and storage:

  1. After the end of each shift, the soil of all parts of the machine should be removed.

2, check the fasteners of each part, if loose and timely tighten

  1. Check whether the rotating parts are flexible or not. If it is not normal, it should be adjusted and eliminated in time.
  2. When not in use for a long time, the machine should be protected from rain and avoid contact with acidic substances to avoid corrosion. The blade should be oiled!

Adopt international advanced technology, cast rubber drive wheel, reduce rack wear and prolong life.

 

 

 

 

Tagged as: , , ,

Leave a Response

You must be logged in to post a comment. Your Ad Here