Your Ad Here

Automatic molding technology of fast working grinding wheel

Resin flake fast working grinding wheel is ideal for large-scale production, which is automatic press forming. This technology can effectively save labor costs and greatly improve production efficiency.

As early as the early 1980s, people in the industry explored and tried this technology. At that time, an automatic forming press was imported from abroad. This machine is quite compact in design, and it differs from ordinary presses in that it has an additional feed system.

Its working principle is: put the mixture into the upper hopper, shake it, drop it on the conveyor belt, scrape it with a scraper, then adjust the conveying speed, and finally send the material to the weighing hopper, after weighing accurately The material is put into the mold cavity.

Guaranteed Best Prices on Domains and Hosting!!!

The design principle seems to be quite effective in increasing production efficiency. But there is a practical problem that no matter how it is adjusted, it will never reach the ideal level of design. Because the thin grinding wheel is not like smelting corundum and silicon carbide, the error of the raw material can’t be too large. It is not an easy task to weigh accurately through the conveyor belt. Repeated adjustment can not only improve the efficiency, but also waste a lot of time. Nowadays, a compromise is adopted to bypass the more difficult feed system, artificial feed, multi-station press, labor intensity reduction, and production efficiency.

Leave a Response

You must be logged in to post a comment. Your Ad Here